Ejector Pins Shoulder Type
H-13 Steel, Nitrided RC 65-74
| Tolerances | | DIA | -.0003" | T | +.000" | | -.0008" | -.002" | | H | +.000" | L | +.12" | | -.010" | -.00" |
|
| How to Order: Qty. | PartNo. - | Length | Shoulder | | Examples:20 | EP1/32- | 6" | S1/2 | | 40 | EP-3/32 | 14" | S2 | | 60 | EPO-7/64 | 10" | S2 |
|
| Part No. | S | DIA | H | T | Length L | Pcs.
Per
Box |
Shoulder
Length | Pin
Diameter | Head
Diameter | Head
Height | L4" | L6" | L10"
+.005" | 10" OS | L14" |
| EP 1/32 x L S1/2 | 1/2" | 1/32 | 1/4 | 1/8 | | * | | | | 20 |
| EP 3/64 x L S1/2 | 1/2" | 3/64 | 1/4 | 1/8 | * | * | * | *EPO | * |
| EP 1/16 x L S1/2 | 1/2" | 1/16 | 1/4 | 1/8 | * | * | * | *EPO | * |
| EP 5/64 x L S1/2 | 1/2" | 5/64 | 1/4 | 1/8 | * | * | * | *EPO | * |
| EP 3/32 x L S1/2 | 1/2" | 3/32 | 1/4 | 1/8 | * | * | * | *EPO | * |
| EP 7/64 x L S1/2 | 1/2" | 7/64 | 1/4 | 1/8 | * | * | * | *EPO | * |
| EP 1/32 x L 2 | 2 | 1/32 | 1/4 | 1/8 | | * | | | |
| EP 3/64 x L 2 | 2 | 3/64 | 1/4 | 1/8 | | * | * | *EPO | * |
| EP 1/16 x L 2 | 2 | 1/16 | 1/4 | 1/8 | | * | * | *EPO | * |
| EP 5/64 x L 2 | 2 | 5/64 | 1/4 | 1/8 | | * | * | *EPO | * |
| EP 3/32 x L 2 | 2 | 3/32 | 1/4 | 1/8 | | * | * | *EPO | * |
| EP 7/64 x L 2 | 2 | 7/64 | 1/4 | 1/8 | | * | * | *EPO | * |
Lubricated Pins
All of our oins are offered per quotation with Permanent Dry-Lube treatment by DICORNITE®. DICORNITE® is a Tungsten disulfide coating which provides a thin arrier between opposing metal surfaces. It prevents metal to metal contact. This barrier is a permanent addition to the metal surface and can only be removed by removing a portion of the substrate. Applied at room temperature and unaffected by the heat of the molding process, it will extend the life of the pins while providing fail-safe protection through the elimination of galling and seizing.
Benefits:
- Reduce wear
- Reduce lubricating requirements
- Eliminating stacking and seizing
- Pins will not score or gall
- Reduce wear caused flash
- Lubricant will not migrate to molded surface
- Safe for medical applications
Return to top of PageCopyright © 2007 Dayne Supply, Inc.
